
Water Problems
Common Solutions
Average Installation Cost
Note:
prices will vary with systems size in terms of treatment capacity in gallons per minutes & "UV" dosage
rating
Reverse osmosis drinking water system (supplies ~ 8.0 gals/day
to a separate sink-mounted faucet and/or refrigerator)
Meter-controlled water softener Two (2) cartridge filters in series
Note:
Many homes have a modest "sulfur" odor that may be correctable with a simple air injection device (~$200.00).
If the odor is in the "hot"only, the anode rod in an electric hot water heater is frequently the culprit.
Cartridge filter
WATER PROBLEMS AND SOULTIONS
Coliform Bacteria
can enter well and then clorinate & retest
If first step not successful....
$1,195.00
Nitrates, Sodium, Chlorides, Lead, Copper Sulfates
Note: Copper
and Lead is usually corrodes off of the plimbing by an
acicdic pH
$795.00
Acidic pH
$845.00
$995.00
$895.00
Iron, Manganese & Hardness
(cycles only as needed based on usage)
$1,300.00
Color & Turbidity
One (1) automatic "sand" filter after the cartridge filters
$295.00
$995.00
Hydrogen Sulfide (True)
$1,300.00
$1,300.00
$1,800.00
Sediment
Note:
With heavy sediment volume, a special "screen" can be installed around the submersible pump itself along
with a cartridge filter
$225.00
~$500.00
IMPORTANT:
The above recommendations are meant as a generalized guideline only. Frequently, individualized treatment strategies
are required. Also, only the most common methods are listed. There are, for example, several ways to treat iron.
The pricing is based on standard sizing and industry averages. As always, please feel free to call for specific
recommendations and pricing which we are happy to provide over the phone.
Home Page